NEWS

NEWS CENTER
Points to pay attention to when designing flanges

Points to pay attention to when designing flanges

Flange is also called flange flange or flange. Flanges are parts that connect shafts to shafts and are used to connect pipe ends; they are also used for flanges on the inlet and outlet of equipment and the connection between two equipment, such as reducer flanges.

11

2023

/

05

What are the safety hazards of installing flanges in cars?

What are the safety hazards of installing flanges in cars?

Non-players are not recommended to install flanges. The potential safety hazard is that once the flange screws are loose and broken, the wheels will fall off. The probability is very low, and after the screw is loosened, the old driver can feel the wheel shaking, and stopping in time can avoid accidents. However, the harm of installing inferior flanges is relatively large. For example, the screws are not loose and broken, but the flange is broken due to insufficient strength! At this time, the wheels must fly out, and the vehicle is in danger of losing control.

11

2023

/

05

What is the optimal thickness of the flange installed on the car?

What is the optimal thickness of the flange installed on the car?

The optimal thickness of the flange installed on the car is between 25 and 30mm. Adding the flange will increase the coaxial wheelbase of the car, and the grip ability will also become stronger when driving, thus greatly improving the car's ability to handle sharp turns. Excellent stability, not prone to sideslip phenomenon, so that driving safety can be improved. After the vehicle is equipped with a flange, the rim of the car tire will be flush with the fender, and the car will look more dynamic and the visual effect will be better. The installation of flanges can balance the center of gravity of the car body and make the car more stable when driving. It is mostly used to prevent the car from slipping when turning sharply, causing danger.

11

2023

/

05

Tensioner accessories supplier: structure of tensioner accessories

Tensioner accessories supplier: structure of tensioner accessories

According to the tensioner accessories supplier , the tensioner accessories are divided into accessory tensioner (generator belt tensioner, air conditioner belt tensioner, supercharger belt tensioner, etc.) and timing belt tensioner. The tensioning wheel is mainly divided into mechanical automatic tensioning wheel and hydraulic automatic tensioning wheel according to the tensioning method. The tensioning wheel is mainly composed of a fixed housing, a tensioning arm, a wheel body, a torsion spring, a rolling bearing and a spring sleeve. The tension can be adjusted automatically according to the degree of belt tightness, so that the transmission system is stable, safe and reliable. The tightening ring is a vulnerable part such as auto parts. The belt is easy to wear after a long time. The belt runs more smoothly, makes less noise, and prevents slipping.

28

2022

/

07

The position and function of the tensioning wheel accessories on the trolley

The position and function of the tensioning wheel accessories on the trolley

The tensioning wheel accessory is the tightness of the timing belt. Usually with a timing belt, so as not to worry. No other parts are required. The timing tensioner is mainly composed of a fixed housing, a tensioning arm, a wheel body, rolling bearings and sleeves. According to the different degree of tightness, the tension force can be automatically adjusted to make the transmission system stable, safe and reliable.

10

2022

/

01

Characteristics of automobile water pump flange

Characteristics of automobile water pump flange

Automobile water pump flanges generally have the function of self-priming. Self-priming means that when the water pump of the water pump is filled with air, the negative pressure (vacuum) formed when the water pump is working will be lower than the water pressure of other water outlets under the action of atmospheric pressure. up, and out the drain end of the pump. Before this process, there is no need to add "water diversion (water guide)". A micropump with this self-priming ability is called a "miniature self-priming pump", and its principle is similar to that of a microair pump.

12

2021

/

11

< 12 >