NEWS

NEWS CENTER

The position and function of the tensioning wheel accessories on the trolley

Time：

2022-01-10

The tensioning wheel accessory is the tightness of the timing belt. Usually with a timing belt, so as not to worry. No other parts are required. The timing tensioner is mainly composed of a fixed housing, a tensioning arm, a wheel body, rolling bearings and sleeves. According to the different degree of tightness, the tension force can be automatically adjusted to make the transmission system stable, safe and reliable.

Tensioner accessories are vulnerable parts of automobiles and other parts. They are easy to elongate after a long time of use. Some tensioners can be automatically tensioned. In addition, the tensioner runs more smoothly, with less noise, and can prevent slipping. The tensioner accessory is the tightness of the synchronous belt, which is generally replaced by a synchronous belt to avoid worries. Other components are not used, as long as regular maintenance is enough, but the engine oil must be frequent, and the general driving distance should be more than four to five thousand kilometers.

Tensioner accessories are vulnerable parts of automobiles and other parts. They are easy to elongate after a long time of use. Some tensioners can be automatically tensioned. In addition, the tensioner runs more smoothly, with less noise, and can prevent slipping. The tension wheel is the tightness of the synchronous belt, which is generally replaced by a synchronous belt to avoid worries. Other components are not used, as long as regular maintenance is enough, but the engine oil must be frequent, and the general driving distance should be more than four to five thousand kilometers.

Tensioner accessories usually use timing belts to avoid worry. Other parts are not required. Just go for regular maintenance. Engine oil must be used frequently, generally 4,000 to 5,000 kilometers. The structure and principle of the tensioning wheel and resistance of the automobile, in the actual use of the tensioning wheel, in order to maintain an appropriate tension, avoid slipping, and compensate for the wear and aging caused by elongation, a certain degree is required. When the compacting wheel is in operation, the movement may cause vibrations in the compacting wheel, causing premature wear of the compacting wheel. For this purpose, a resistance mechanism is added to the tensioner. However, there are many parameters that affect the torque and resistance of the tightening wheel, and the influence of each parameter is not the same, so the relationship between the components of the tightening wheel and the torque and resistance is very complicated. The change of torque directly affects the change of resistance, which is the main factor affecting resistance, and the main factor of torque is the parameter of . Appropriately reducing the middle diameter of the spring can increase the resistance value of the tensioner. The main purpose of the tensioner bearing is to support the mechanical rotating body, reduce the friction coefficient during its movement, ensure its rotation accuracy, and change the sliding friction into rolling friction.

Related information

Points to pay attention to when designing flanges

Flange is also called flange flange or flange. Flanges are parts that connect shafts to shafts and are used to connect pipe ends; they are also used for flanges on the inlet and outlet of equipment and the connection between two equipment, such as reducer flanges.

2023-05-11

detail

What are the safety hazards of installing flanges in cars?

Non-players are not recommended to install flanges. The potential safety hazard is that once the flange screws are loose and broken, the wheels will fall off. The probability is very low, and after the screw is loosened, the old driver can feel the wheel shaking, and stopping in time can avoid accidents. However, the harm of installing inferior flanges is relatively large. For example, the screws are not loose and broken, but the flange is broken due to insufficient strength! At this time, the wheels must fly out, and the vehicle is in danger of losing control.

2023-05-11

detail

What is the optimal thickness of the flange installed on the car?

The optimal thickness of the flange installed on the car is between 25 and 30mm. Adding the flange will increase the coaxial wheelbase of the car, and the grip ability will also become stronger when driving, thus greatly improving the car's ability to handle sharp turns. Excellent stability, not prone to sideslip phenomenon, so that driving safety can be improved. After the vehicle is equipped with a flange, the rim of the car tire will be flush with the fender, and the car will look more dynamic and the visual effect will be better. The installation of flanges can balance the center of gravity of the car body and make the car more stable when driving. It is mostly used to prevent the car from slipping when turning sharply, causing danger.

2023-05-11

detail

Tensioner accessories supplier: structure of tensioner accessories

According to the tensioner accessories supplier , the tensioner accessories are divided into accessory tensioner (generator belt tensioner, air conditioner belt tensioner, supercharger belt tensioner, etc.) and timing belt tensioner. The tensioning wheel is mainly divided into mechanical automatic tensioning wheel and hydraulic automatic tensioning wheel according to the tensioning method. The tensioning wheel is mainly composed of a fixed housing, a tensioning arm, a wheel body, a torsion spring, a rolling bearing and a spring sleeve. The tension can be adjusted automatically according to the degree of belt tightness, so that the transmission system is stable, safe and reliable. The tightening ring is a vulnerable part such as auto parts. The belt is easy to wear after a long time. The belt runs more smoothly, makes less noise, and prevents slipping.

2022-07-28

detail
< 123 >