NEWS

NEWS CENTER

What are the advantages and disadvantages of installing flanges on cars?

Time：

2021-11-09

The advantage of adding a flange is that it is more stable when turning sharply. The following is an introduction to the advantages and disadvantages of adding a flange:

1. Advantages of installing flanges on cars:

(1) The body posture of some models is unsatisfactory, and the wheels protrude slightly after adding flanges, which can make the vehicle more powerful from the appearance, and the wide-body modified cars will appear to have concave tires, which can be perfectly solved by adding flanges this problem.

(2) After the flange is installed, the coaxial wheelbase of the vehicle becomes longer, and the vehicle flutters and the roll feeling can be improved when driving at high speed and making sharp turns.

(3) The material of the flange is usually aluminum alloy, which will not add too much weight.

(4) Modification of large brake calipers and installation of flanges can give way to the calipers.

2. Disadvantages of installing flanges on cars:

(1) Vehicle bumps will be severe when walking on uneven roads, which will cause certain damage to the half-axis universal joints.

(2) The quality of the flange is uneven, and once the flange is damaged, it will affect the original wheel hub.

(3) One of the factors in the vehicle suspension adjustment is to reduce the abnormal wear of the tires. Adding flanges to change the wheelbase will cause abnormal wear of the tires.

(4) The vehicle should not be overloaded, because the reason mentioned in the third point will cause the tires to wear abnormally and sometimes rub against the wheel eyebrows.

Related information

Points to pay attention to when designing flanges

Flange is also called flange flange or flange. Flanges are parts that connect shafts to shafts and are used to connect pipe ends; they are also used for flanges on the inlet and outlet of equipment and the connection between two equipment, such as reducer flanges.

2023-05-11

detail

What are the safety hazards of installing flanges in cars?

Non-players are not recommended to install flanges. The potential safety hazard is that once the flange screws are loose and broken, the wheels will fall off. The probability is very low, and after the screw is loosened, the old driver can feel the wheel shaking, and stopping in time can avoid accidents. However, the harm of installing inferior flanges is relatively large. For example, the screws are not loose and broken, but the flange is broken due to insufficient strength! At this time, the wheels must fly out, and the vehicle is in danger of losing control.

2023-05-11

detail

What is the optimal thickness of the flange installed on the car?

The optimal thickness of the flange installed on the car is between 25 and 30mm. Adding the flange will increase the coaxial wheelbase of the car, and the grip ability will also become stronger when driving, thus greatly improving the car's ability to handle sharp turns. Excellent stability, not prone to sideslip phenomenon, so that driving safety can be improved. After the vehicle is equipped with a flange, the rim of the car tire will be flush with the fender, and the car will look more dynamic and the visual effect will be better. The installation of flanges can balance the center of gravity of the car body and make the car more stable when driving. It is mostly used to prevent the car from slipping when turning sharply, causing danger.

2023-05-11

detail

Tensioner accessories supplier: structure of tensioner accessories

According to the tensioner accessories supplier , the tensioner accessories are divided into accessory tensioner (generator belt tensioner, air conditioner belt tensioner, supercharger belt tensioner, etc.) and timing belt tensioner. The tensioning wheel is mainly divided into mechanical automatic tensioning wheel and hydraulic automatic tensioning wheel according to the tensioning method. The tensioning wheel is mainly composed of a fixed housing, a tensioning arm, a wheel body, a torsion spring, a rolling bearing and a spring sleeve. The tension can be adjusted automatically according to the degree of belt tightness, so that the transmission system is stable, safe and reliable. The tightening ring is a vulnerable part such as auto parts. The belt is easy to wear after a long time. The belt runs more smoothly, makes less noise, and prevents slipping.

2022-07-28

detail
< 123 >